COLOR Paint Protection Film

COLOR Paint Protection Film in Birmingham, Alabama

Color paint protection film gives you a completely new look for your vehicle while shielding the factory paint underneath it. Trident Auto Solutions installs color film for drivers who want the visual impact of a color change along with the same impact resistance our clear film is known for. It is one of the fastest growing requests we get from Birmingham drivers who want their vehicle to stand out without committing to a permanent repaint.

Turquoise geometric hexagon-like logo on a white background
Four cyan diagonal bars on a white background
A Different Category Than a Vinyl Wrap

What Sets Colored Film Apart From a Vinyl Wrap

A narrow blue-and-white abstract graphic with small turquoise text near the top and bottom.

Color paint protection film and a vinyl wrap can look similar at a glance, but they are built for very different jobs. A vinyl wrap is a thinner material designed primarily for cosmetic change, and it offers little in the way of impact resistance.


Color film is built on the same thick, urethane base as our standard clear film, which means it absorbs rock chips, road debris, and everyday scuffs the same way, while also giving you a full color change across the vehicle. If you want a new look and a shield for your paint in a single install, color film is the more complete option.

Person applies yellow tape to a black car wrapped in glossy film in a workshop
Hands applying glossy purple vinyl film to a curved panel in a workshop
Hand holding a pink-and-yellow squeegee on a car window, cleaning the surface
Close-up of a white car’s front fender and wheel arch.
Trident Auto Detailing logo with blue car outline, gold trident, and teal lettering on a white background

OUR COLOR PAINT PROTECTION FILM PACKAGE

Thin horizontal banner with a white center and teal accents at the top and bottom edges
A New Look That Shields Your Paint

THE BEST OF BOTH WORLDS (COLOR CHANGE PPF)

Starting At $7,500

The Best of Both Worlds covers your entire vehicle in Pure PPF color film, giving you a complete color transformation along with full film level impact resistance across every panel. It is always installed as a whole vehicle package, since a partial color change would leave an inconsistent look between film and factory paint. Because it is a film rather than a permanent change, the color is also fully reversible whenever you are ready for something new.

Is Color Film Right for Your Vehicle?

What to Expect From a Color Change Install

Minimal white webpage header with small cyan text logos near the top left and top center.

A full color film install takes longer than a standard clear application, since our technicians are working across every panel on the vehicle to keep seams and edges consistent. Once installed, the surface has a smooth, factory-like texture, and many of our clients choose to add a ceramic coating on top for extra gloss and easier washing. If you are torn between color film and a wrap, our team is happy to walk through your options in person and help you land on the right choice for your vehicle and your budget.

Depending on the color and finish you choose, a full vehicle install can take several days from start to finish, since every panel is cut and fitted individually for a seamless result rather than stretched across the body like a wrap. We will give you an accurate timeline before you book. Once the install is complete, we ask that you avoid washing the vehicle for a short curing period so the film has time to fully bond to the surface.

Four turquoise diagonal bars on a white background
Cyan geometric hexagon logo on a white background
Hand peeling protective film from a glossy black car hood in a workshop

Ready for a New Look That Shields Your Paint?

Four turquoise diagonal slashes on a white background
Hands apply black vinyl wrap to a car panel in a workshop
More Than Just One Shade

Finding the Right Color for Your Vehicle

Wide white banner with small aqua logos near the top left and top right on a light gray background

Color film comes in a much wider range of finishes than most drivers expect, from deep gloss tones to satin and eggshell textures that sit somewhere between a traditional gloss and a full matte look. Some of our most requested finishes lean toward muted, low-keycolors that still stand out because of the texture rather than a bright, attention-grabbing shade. Others go the opposite direction entirely, with bold colors chosen specifically to make a vehicle impossible to miss in a parking lot.

Because color film availability depends on current manufacturer inventory, our team will walk you through what is realistic for your timeline versus what might require a short wait for a specific roll to come in. If you already have a shade in mind, bring a reference photo to your consultation so we can match you with the closest available option or place an order for the exact finish you are picturing.

A Reversible Way to Try a New Look

Why Drivers Choose Color Film Over a Repaint

Wide white banner with two small cyan logos near the top edge
Black line icon of a car with a coin showing a dollar sign on it

Repaints Are Permanent and Costly

A traditional repaint is permanent, expensive, and typically involves your vehicle being out of commission for weeks.

Black clock icon with motion lines on the left, suggesting time or speed.

Color Film Works Much Faster

Color film gets you the same visual transformation in a fraction of the time a full respray would take.

Black outline icon of a user next to a padlock, suggesting account security or access control

You Are Never

Locked In

Because it is a film rather than a change to the paint underneath, you are never locked into the decision the way you would with a repaint.

Three black directional arrows: left, up, and right, on a white background

A Flexible, Popular Choice

That flexibility is a big reason color film has become a popular choice for drivers who want to update their vehicle's look without the cost or commitment of a full respray.

Still Have Questions?

COLOR PAINT PROTECTION FILM FAQs

Thin horizontal banner with a white background and small cyan logos near the top edge.
  • Is color film the same as a vinyl wrap?

    Color film is built on a much thicker urethane base than standard vinyl wrap, giving it real impact resistance in addition to a full color change. A wrap is thinner and designed mainly for looks.

  • Can I remove color film later?

    Since it is a film and not a permanent paint change, it can be removed by a professional, revealing the factory finish underneath, provided that finish has been properly cared for.

  • Does color film need special care?

    A ceramic coating applied over the film adds hydrophobic properties that make washing easier and help the color stay vibrant. Beyond that, the same gentle wash routine we recommend for our clear film applies here as well.

  • Can I choose any color for my film?

    Color availability depends on current film inventory and your vehicle. Our team can walk you through current options when you come in for a quote.

  • How long does a full color film install take?

    A full vehicle color change takes longer than a clear install, since every panel needs to be fitted and finished consistently. We will give you an accurate timeline once we see your vehicle.

  • Will color film work with my vehicle's existing wraps or decals?

    Existing wraps, decals, or aftermarket vinyl need to be removed before a color film install so our technicians are working with the factory surface underneath. If you are not sure what is currently on your vehicle, we can take a look during your consultation and advise on the best next step.

Four cyan diagonal bars on a white background
Gloved hands applying orange tape to a black car’s headlight in a workshop